Epson GT-30000 Document Scanner

Selected FAQ

What type of computer interface can I use to connect to the scanner?
You can connect the scanner to your computer in one of the following ways:
1. SCSI - If you have a compatible PCI SCSI/SCSI 2 adapter board, or your computer has an ASPI-compliant SCSI 2 board (Adaptec (r) boards are recommended), you can connect the scanner with a SCSI 2 cable (micro DB 50-pin connector) not more than 9.8 feet (3 meters) long. If you want to use the 68-pin connector, you will need a SCSI 3 cable and SCSI ultra-wide 68-pin host adapter board.
2. IEEE 1394 - If you have purchased the optional IEEE 1394 scanner interface card, you can connect the scanner to your PC with the IEEE 1394 cable. Your PC must have an OHCI compliant port or card, and must be running a pre-installed version of Windows Me or Windows 2000. For installation instructions, see page 21 of your user's manual.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page