Epson GT-30000 Document Scanner

Selected FAQ

Q:
Can the GT-30000 be networked?
A:
Yes you can use the EPSON GT-30000 as a network scanner. Your computers must be configured and operational on an existing network with TCP/IP Protocol installed. Then you can use the EPSON Scan Server and EPSON TWAIN HS Network software applications on your scanner software CD-ROM to share your scanner with other users in a small workgroup. Your scanner network must have a scanner server (the Windows computer connected to the scanner) and at least one or more client computers. Only one client computer can access the scanner at a time. However, you can have more than one scanner and scanner server on a network, so clients can choose which scanner to use. Your system must meet these minimum requirements for sharing a scanner:
- The network computer that you use as the scanner server must be an IBM-compatible computer running Windows Me, Windows 98, Windows 95, Windows 2000, or Windows NT 4.0 (Windows NT 4.0 with Service Pack 3, or later is recommended).
- Client computers must run Windows Me, Windows 98, Windows 95, Windows 2000, or Windows NT 4.0.
- Both the client computers and the scanner server must have a network interface card installed, and must be running the TCP/IP Protocol. (See Appendix A, "Installing the TCP/IP Protocol," for instructions.)
- The network computer that you use as the scanner server must have EPSON Scan Server installed. EPSON TWAIN HS Network must be installed on client computers to access the scanner over the network.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page