PowerLite TW100 Multimedia Projector

Selected FAQ

Why is the temperature light red?
The projector is overheating, which turns the projection lamp off automatically. Let the projector cool for a few minutes, then turn it back on. Make sure the room temperature is not above 95 degrees F (35 degrees C). Make sure nothing is blocking the ventilation vents. Check to see if the air filter is clogged. If it is, replace or clean the filter by following the steps in your User's Guide. Let the projector cool for a while after cleaning the air filter. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or internal circuits. Please contact EPSON technical support for assistance.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page