PowerLite 1925W Multimedia Projector

Selected FAQ

The image is too light or dark, or colors are incorrect. What should I do?
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.

  • Press the Color Mode button on the remote control to try different color modes for the image and environment.

  • Adjust the available settings in the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation.

  • Make sure you selected the correct input source on the Signal menu. See Input Signal Settings - Signal Menu.

  • For computers, check the color balance of your computer’s display. (See your computer manual for details.)

  • If the colors are incorrect from a composite video or S-Video soure, make sure you selected the correct Video Signal setting.

  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.

  • If the image has been progressively darkening, you may need to replace the projector lamp soon.
Published: December 22, 2009

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page