PowerLite 1915 Multimedia Projector

Selected FAQ

Q:
My networked projector is displaying an Event ID error code. What is wrong?
A:
If the Event ID option on the Info menu displays a code number, check the following list of Event ID codes for the solution to the projector problem associated with the code.

Event ID Code Cause and Solution
0432 The EasyMP Network Projection program did not start. Turn the projector off and then on again.
0435
0434 Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again.
0482
0484
0485
0433 Cannot display the transferred images. Restart the EasyMP Network Projection program.
0481 Communication with computer was disconnected. Restart the EasyMP Network Projection program.
0483 The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again.
04FE
0479 A projector system error occurred. Turn the projector off and on again.
04FF
0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID.
0892 The WPA/WPA2 authentication does not match. Make sure the wireless network security settings are correct.
0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct.
0894 Communication with unauthorized access point was disconnected. Contact your network administrator.
0898 Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are using DHCP, turn off the DHCP setting in the Network Menu.
0895 A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not resolve the problem, contact Epson for help.
0899
Published: June 26, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page