PowerLite Home Cinema 8100 Projector

Selected FAQ

Q:
How do I adjust the projector settings for rear and/or ceiling placement?
A:
Follow these steps:

  1. Press the Menu button on the remote control.


  2. Open the Settings menu, then select Projection.


  3. Select Front, Front/Ceiling, Rear, or Rear/Ceiling.


  4. Press the Menu button when done.
Note: To project from overhead, you’ll need the optional ceiling mount hardware. You can purchase the projector mount (part number ELPHB550) from your dealer or from the Epson Store
Published: December 22, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page