High Resolution Document Imager

Selected FAQ

Q:
What can cause the image to contain static or noise?
A:
If you're using cables that are longer than 6 feet (2 m), or an extension cable, the image quality may be reduced. Keep your projector, computer, and video cables away from the power cord as much as possible to prevent interference. The camera head switches may be set incorrectly. Try adjusting the switches. The gamma selection switch adjusts the output color to match the device connected to the RGB OUT port. Set the switch to OFF when connected to a projector or ON when connected to a monitor. The frequency selection switch is factory set to 60Hz.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page