PowerLite 71c Multimedia Projector

Selected FAQ

What should I do if I get a blank screen or a blue screen with the message "No Signal" after turning on the computer or video source?
Do one of the following: 1. Make sure the cables are connected correctly, as described in the User's Guide. 2. Make sure the power light is green and not flashing and the lens cover is off. 3. Try restarting your computer. 4. If you've connected more than one computer and/or video source, you may need to press the Source button on top of the projector or the Computer, Video or S-Video button on the remote control to select the correct source. Allow a few seconds for the projector to sync up after pressing the button. If you're using a PowerBook or iBook running OS 9.x or earlier you may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors and Sound. 2. Click the Arrange icon and drag one monitor icon on top of the other. If the Arrange option isn't available, you may need to select one of the Simulscan resolution settings: 3. Click the Monitor icon. 4. Select a Simulscan resolution. Allow a few seconds for the projector to sync up after making the selection. If you're using a PowerBook or iBook running OS x follow these steps: 1. Select Systems Preferences from the Apple menu. 2. Click Displays. 3. Click Detect Displays to display part of your desktop on the projector screen. 4. To display the entire desktop on both your computer and the projector screen, click the Arrange tab. (If you don't see this tab, check to see if there is a window hidden by another window on your screen.) 5. Click "Mirror Displays" in the lower corner of your screen. One of the monitor icons automatically moves on top of the other. If you're using a PC laptop: 1. Hold down the the Fn key and press the function key that lets you display on an external monitor. It's often labeled with an icon such as but it may also be labeled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time. Check your laptop's manual or online help for details. 2. Depending on your computer's video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer's documentation or online help for details.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page