PowerLite 460 Multimedia Projector

Selected FAQ

Q:
Nothing is projected on the screen. What should I do?
A:
Try the following:

  • Check that the  power light is green and not flashing. Also press the A/V Mute button on the remote control to see if the picture was turned off temporarily.


  • The projector may be in standby or sleep mode. If the  power light is orange, press the  power button to turn the projector on.


  • If the power was switched off and then on again, the projector may be cooling down. Wait until the  power light stops flashing and remains orange; then press the  power button again.


  • The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.


  • If you are projecting from a DVD player or other video source, make sure you turn it on and press its Play button.


  • If you are projecting video from a laptop, you may need to set the laptop to external output only.


  • If you are projecting from a composite or S-Video source, make sure the Video Signal setting is correct. See Adjusting Signal Settings.


  • You can also try resetting all of the menu settings. See Restoring the Default Settings.
Published: March 8, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page