PowerLite 83V+ Multimedia Projector

Selected FAQ

Part of my image is blurred or out of focus. What should I do?
Try the following:

  • Adjust the focus.

  • There may be dirt on the lens. Clean the lens.

  • Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment.

  • Make sure the projector is positioned correctly and the projection distance is within range. See Positioning the Projector.

  • Adjust the Sharpness setting on the Image menu. See Adjusting Colors and Clarity. You should be able to see the effect on the screen immediately.

  • Make sure the input signal setting on the Signal menu matches the signal from the connected device. See Adjusting the Input Signal.

  • If you're projecting from a computer, you may need to adjust the Tracking and Sync settings. See Adjusting the Input Signal.
Published: March 9, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page