PowerLite Pro Z8050WNL WXGA 3LCD Projector

Selected FAQ

Q:
Why does the image/picture have a blue cast or haze when I connect my video equipment (DVD player, satellite receiver, etc.) to the projector using a component video cable?
A:
The problem could be caused by the connection or configuration of your video equipment. Check the following:

  • Make sure your component video cable is properly connected. The connectors on the cable are color-coded. The red, green, and blue connectors should be attached to the red, green, and blue component video-out connectors on your equipment and the red, green, and blue component video-in connectors on the projector.


  • Make sure the projector’s Input Signal setting is set correctly to match the output signal of your connected video equipment.


  • Make sure the connected video equipment is set up to output video to component video.
Published: December 23, 2009

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page