Epson Ensemble HD 8100 Home Cinema System

Selected FAQ

Why won’t the screen lower?
Try the following:
  • Check for a blue light at the top of the screen. The light indicates that the screen is receiving power. If the light is off, make sure the power cords on the back of the subwoofer are connected securely.

  • Select the PROJ (Projector) option on the remote control, then select S-DWN to lower the screen.

  • The screen may be stuck in the closed position. Grasp the weighted bar that hangs from the bottom of the screen and pull it slightly to free it. Then try opening the screen again with the remote control.

  • The screen motor may have overheated if you repeatedly raised and lowered the screen. Let the motor cool for 5 to 10 minutes, then try operating the screen again.

  • Check for problems with the remote control. See Problems Using the Remote Control.
Published: February 5, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page