Epson Stylus NX125 All-in-One Printer

Selected FAQ

Q:
What should I do if the printout contains incorrect characters?
A:
Try the following:
  • Make sure the USB cable is a shielded "AB" cable not more than 6.5 feet (2 meters) long.


  • Make sure your printer is selected as the active printer in your printing program.


  • Turn off the all-in-one, check that the cables are securely connected, turn it back on, then try printing again.


  • If you're using a switch box or USB hub with your printer, connect the printer directly to your computer.


  • Turn the printer off and then on again.


  • In Windows, clear any stalled print jobs from the Windows Spooler:


  • Windows 7:
    Click and select Devices and Printers. Then right-click EPSON NX125 NX127 Series, select See what's printing, right-click the stalled print job, and click Cancel and then Yes.

    Windows Vista:
    Click , select Control Panel, and click Printer under Hardware and Sound. Then right-click EPSON NX125 NX127 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.

    Windows XP:
    Click Start and select Printers and Faxes. (Or open the Control Panel, select Printers and Other Hardware if necessary, and then Printers and Faxes). Then right-click EPSON NX125 NX127 Series, select Open, right-click the stalled print job, and click Cancel and then Yes.
Published: March 25, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page