BrightLink 450Wi Interactive Projector

Selected FAQ

What should I do if only part of the computer image is displayed or the image looks distorted?
Check the following:

  • Press the Auto button on the remote control or the Enter button on the projector.

  • Make sure the image Position setting is correct in the Signal menu. See Adjusting Signal Settings for more information.

  • Press the Aspect button on the remote control or select the correct Aspect setting from the Signal menu. See Resizing Video Images for details on the available options.

  • Press the Esc button on the remote control to cancel the E-Zoom function.

  • Make sure your computer's resolution setting is correct. See Compatible Video Formats.

  • You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.

  • If you're projecting a widescreen computer image, adjust the Resolution setting, if necessary. See Adjusting Signal Settings.

  • If you're projecting an image from a computer with dual display activated, turn dual display off.

  • Make sure the image is equal on all sides.

  • Turn off Keystone correction and adjust the wall plate by lowering the projection angle to reduce keystone.

Published: May 11, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page