BrightLink 450Wi Interactive Projector

Selected FAQ

What should I do if my interactive pen does not follow or write, and it lags or skips?
Try the following:

  • Recalibrate your pen.

  • If the cable cover is not attached, make sure the cables are not blocking the signal.

  • Make sure the pen batteries have enough power. If the light on the pen doesn't turn green when you press the button, you need to replace the batteries.

  • Dim the room lights and turn off any fluorescent lights. Make sure the projection surface and the pen receiver are not in direct sunlight or other sources of bright lighting.

  • Connect the USB cable directly from the computer to the projector, not through a hub. Make sure the USB cable is securely connected to the projector and computer. Try disconnecting and reconnecting the cable to your computer.

  • From your operating system's Display utility, select Settings > Advanced > Troubleshoot, and set Hardware acceleration to None.

  • Make sure the signal is set to Computer and not USB Display.

  • Update your computer's video driver.

  • If your interactive pen icon has an X icon
  • on it, try restarting the the Easy Interactive Driver.
Published: May 12, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page