PowerLite 84+ Multimedia Projector

Selected FAQ

The image is too light or dark, or colors are incorrect. What should I do?
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.

  • Make sure the cables are securely connected.

  • Press the Color Mode button on the remote control to select a different color mode. See Adjusting the Color Mode.

  • If you're displaying video, adjust the Color Saturation and Tint settings in the Image menu. See Adjusting the Image.

  • Adjust the Brightness, Contrast and Color Adjustment settings on the Image menu. See Adjusting the Image.

  • Try changing the Power Consumption in the Settings menu. See Customizing Projector Features.

  • Make sure the input signal setting on the Signal menu matches the signal from the connected device. See Adjusting Signal Settings.

    If the image is too purple and you've connected a computer or RGB video device to the Computer1 or Computer2 port, select RGB as the Input Signal setting. If you've connected a component video device to one of these ports, select Component.

    If you're projecting from a composite video or S-Video source, make sure the correct Video Signal is selected on the Signal menu.

  • Check your computer display settings to correct the color balance.

  • If the image seems dark, the lamp may be nearing time for replacement. See Replacing the Lamp.

  • In the Image menu, select Reset to change the color settings back to their defaults.
Published: February 9, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page