Epson WorkForce 633 All-in-One Printer

Selected FAQ

Q:
During a wireless network installation, the product could not find or connect to the wireless router or access point. What should I do?
A:
Try the following:

  • Try connecting to the wireless router or access point with your computer or another device to confirm that it is working correctly.


  • Make sure that the product is within range of your router or access point.


  • Avoid placing the product near a microwave oven, 2.4 GHz cordless phone, or large metal object such as a filing cabinet.


  • Make sure there aren't any access restrictions (such as MAC address filtering) set on the wireless router or access point. If access restrictions are set, register the product's MAC address on the router or access point. Print a Network Status Sheet to obtain the MAC address. Then see your router or access point's documentation for instructions.


  • If your wireless router or access point doesn't broadcast its network name (SSID), see Entering Your SSID Manually for instructions on connecting to your wireless network. If your wireless router or access point has wireless security enabled, you will also need to know what kind of security it is using.


  • If the product doesn't connect to your wireless network, the WEP key or WPA passphrase may have been entered incorrectly.

    Note:
    WEP keys and WPA passphrases are case-sensitive. Be sure to correctly note uppercase, lowercase, and numeric/special characters.
Published: August 18, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page