Epson Perfection V330 Photo Scanner

Selected FAQ

How should I clean the scanner?
Do the following:
  1. Turn off the scanner.

  2. Unplug the power cord from the scanner.

  3. Clean the outer case with a cloth dampened with mild detergent and water.

  4. If the scanner glass gets dirty, clean it with a soft, dry microfiber cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner on a soft microfiber cloth to remove it. Wipe off all remaining liquid.

  5. Remove the document mat and clean the transparency unit window as described in step 4.

Caution: Do not spray glass cleaner directly on the scanner glass; otherwise, the fluid might leak inside the scanner and damage it.
Published: June 2, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page