Epson Artisan 835 All-in-One Printer

Selected FAQ

What should I do if my product doesn't detect my photos placed on the scan bed when I use the reprint/restore function on the control panel?
Check the following:
  • Make sure the scanner glass is clean and free of finger prints, smudges, etc. (Clean the scanner glass with a soft, lint-free cloth (microfiber is recommended), moistened with a little glass cleaner. Do not spray glass cleaner directly on the glass and do not press the glass surface with any force.)

  • Make sure the photos are placed on the scan bed correctly. See Place Originals for Copying, Faxing, or Scanning.

  • Make sure the photos are no larger than 4 × 6-inch (102 × 152 mm). You can scan multiple photos, as long as they are at least 1.2 × 1.6 inches (30 × 41 mm) in size and place them 1/4 inch (5 mm) apart as shown below.

Published: August 5, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page