Epson WorkForce 323 All-in-One Printer

Selected FAQ

Q:
What should I do if the printout is blurry or smeared?
A:
Check the following:

  • Make sure your paper isn’t damp or curled, or loaded face down (the printable side should be face-up).


  • Use a support sheet with special paper (such as a sheet of plain paper beneath the special paper sheet), or try loading your paper one sheet at a time.


  • Make sure your paper meets the specifications.


  • Make sure the paper Type or Media Type setting matches the paper you loaded.


  • Use Epson papers to ensure proper saturation and absorption of genuine Epson inks. Also, make sure you’re using genuine Epson ink cartridges.


  • Align the print head.


  • Remove each sheet from the output tray as it is printed.


  • Avoid handling printouts on glossy paper for a few hours to allow the ink to set. Let your prints dry separately for at least 12 hours before framing or placing them in protective sheets. If you need to stack them, place a sheet of plain paper between each print.


  • Turn off High Speed mode in the Windows, Macintosh OS X 10.5 and 10.6, or Macintosh OS X 10.4 printer software.


  • If you are using double-sided paper and printing heavily saturated or dark images on the front side of the paper, you may notice that smudges or marks appear on the front when you print the second side. If one side of the paper will contain a lighter image or text, print that side first to eliminate marks or smudging.


  • Clean the rollers inside your printer.
Published: September 3, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page