PowerLite 1750 Multimedia Projector

Selected FAQ

Q:
The image is too light or dark, or colors are incorrect. What should I do?
A:
Try the following:

  • Press the Color Mode button on the remote control to try different color modes for the image and environment.


  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation.


  • Make sure you selected the correct input source on the Signal menu.


  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.


  • For computers, check the color balance of your computer's display. (See your computer manual for details.)


  • If the colors are incorrect from a video source, make sure you selected the correct Video Signal setting.


  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.


  • If the image has been progressively darkening, you may need to replace the projector lamp soon.
Published: October 26, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page