PowerLite 1760W Multimedia Projector

Selected FAQ

Q:
Part of my image is blurred or out of focus. What should I do?
A:
Try the following:

  • Adjust the image focus.


  • Clean the projector lens.

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.


  • Position the projector close enough to the screen, and directly in front of it.


  • Position the projector so the keystone adjustment angle is not so wide that it distorts the image.


  • When using the Screen Fit feature (PowerLite 1775W), position the projector at a compatible distance from the screen or adjust the image shape manually.


  • Turn on automatic keystone adjustment in the projector's menus.


  • Adjust the Sharpness setting to improve image quality.


  • If you are projecting from a computer, press the Auto button on the remote control to automatically adjust the tracking and sync. If any bands or overall blurriness remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.
Published: October 26, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page