PowerLite 1775W Multimedia Projector

Selected FAQ

What should I do if there is no sound, or the sound is not loud enough?
Try the following:

  • Press a Volume button on the remote control to adjust the volume.

  • Press the A/V Mute button to resume video and audio if they were temporarily stopped.

  • Press the Source Search button to switch to the correct input source, if necessary.

  • Check your computer or video source to make sure the volume is turned up.

  • Check the audio cable connections between the projector and your video source.

  • If you do not hear sound from an HDMI source (PowerLite 1760W/1770W/1775W), set the connected device to PCM output.

  • Make sure any connected audio cables are labelled "No Resistance."

  • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page