PowerLite 4100 XGA 3LCD Projector

Selected FAQ

Nothing is projected on the screen. What should I do?
Try the following:

  • Check that the  power light is green, not flashing, and the lens cover is removed.

  • The projector may be in standby or sleep mode. If the  power light is orange, press the  power button to turn on the projector.

  • If the power was switched off and then on again, the projector may be cooling down. Wait until the  power light stops flashing and remains orange, then press the  power button again.

  • Press the A/V Mute button on the remote control to make sure the picture has not been turned off temporarily.

  • The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.

  • If you are projecting from a DVD player or other video source, make sure you turn it on and press its play button.

  • If you are projecting from a video source, make sure the Video Signal setting is correct. See Adjusting Signal Settings.

  • You can also try resetting all of the configuration menu settings. See See Restoring the Default Settings.
Published: December 15, 2010

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page