PowerLite Pro Cinema 9350 1080p 3LCD Projector

Selected FAQ

Q:
How long should the projection lamp last in normal operation?
A:
The projection lamp lasts up to about 4000 hours, depending on the selected Power Consumption setting and other factors. You can use the Info menu to check how long it's been in use. See Checking the Projector Status.

Note:
Lamp life will vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time.

To prolong the life of the lamp, you can do the following:
  • Turn on the projector's Sleep Mode setting. See Other Setup Options.


  • Turn off the projector when not in use.


  • Make sure the projector is operated within the environmental requirement of 41 to 95 °F (5 to 35 °C).


  • Set the projector's Power Consumption setting to ECO. See Input Brightness Settings.


  • Clean the air filter if dust collects on it. See Cleaning and Replacing the Air Filter.


  • When you replace the lamp, make sure you don't touch the lamp with your bare hands. The invisible residue left by the oils on your hands may shorten the lamp life. Use a cloth or a glove to handle the lamp.
Published: October 18, 2010

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page