| Event ID Code |
Cause and Solution |
| 0432 |
The EasyMP Network Projection program did not start. Turn the projector off and then on again. |
| 0435 |
| 0434 |
Unstable network communication. Check the network communication status, wait a few moments, and try connecting to the network again. |
| 0482 |
| 0484 |
| 0485 |
| 0433 |
Cannot display the transferred images. Restart the EasyMP Network Projection program. |
| 0481 |
Communication with computer was disconnected. Restart the EasyMP Network Projection program. |
| 0483 |
The EasyMP Network Projection program quit unexpectedly. Check the network communication status, then turn the projector off and then on again. |
| 04FE |
| 0479 |
A projector system error occurred. Turn the projector off and on again. |
| 04FF |
| 0891 |
Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. |
| 0892 |
The WPA/WPA2 authentication does not match. Make sure the wireless network security settings are correct. |
| 0893 |
The WEP/TKIP/AES encryption type does not match. Make sure the wireless network security settings are correct. |
| 0894 |
Communication with unauthorized access point was disconnected. Contact your network administrator. |
| 0898 |
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you are using DHCP, turn off the DHCP setting in the Network Menu. |
| 0895 |
A communication error has occurred. Try restarting the EasyMP Network Projection program and restarting your projector. If that does not resolve the problem, contact Epson for help. |
| 0899 |