PowerLite 93 Multimedia Projector

Selected FAQ

How do I adjust the projector settings for rear and/or ceiling placement?
Follow these steps:

  1. Turn on the projector to display an image.

  2. Press the Menu button.

  3. Select the Extended menu and press Enter.

  4. Select the Projection setting and press Enter.

  5. Select a projection mode and press Enter.

  6. Press the Esc or Menu to exit the menus.

You can also change the projection settings from Front to Front/Ceiling or from Rear to Rear/Ceiling by pressing and holding the A/V Mute button on the remote control for 5 seconds or until an image appears.


To project from overhead, you'll need the optional ceiling mount hardware. You can purchase the universal ceiling mount (part number ELPMBPJF) from your dealer or from the Epson Store.
Published: February 2, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page