PowerLite 95 XGA 3LCD Projector

Selected FAQ

The image is too light or dark, or colors are incorrect. What should I do?
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor.

  • Press the Color Mode button on the remote control to try different color modes for the image and environment. See Changing the Color Mode.

  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation. See Image Quality Settings.

  • Make sure you selected the correct input source on the Signal menu. See Input Signal Settings

  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting short cables.

  • For computer, check the color balance of your computer's display. (See your computer manual for details.)

  • If the colors are incorrect from a video source, make sure you selected the correct Video Signal setting. See Input Signal Settings.

  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.

  • If the image has been progressively darkening, you may need to replace the projector lamp soon. See Replacing the Lamp.

Note: To set the image adjustments back to the default setting, select Menu, select Image, then Reset.
Published: February 2, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page