PowerLite D6155W WXGA 3LCD Projector
Nothing is projected on the screen. What should I do?
Try the following:
A/V Mute button to see if the image was temporarily turned off.
Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
If you unplugged the projector and plugged it right back in, press the power button to turn on the projector (with Direct Power On enabled).
Check the settings on the Signal menu to make sure they are correct for the current video source.
Brightness setting or select the Normal Power Consumption setting.
Display setting to make sure Messages is set to On.
If the projector does not respond when you press the control panel buttons, the buttons may be locked. Unlock the buttons.
If the projector does not respond when you press buttons on the remote control, make sure the remote receivers are turned on.
For images projected over a network with Windows Media Center, reduce the screen size from full screen mode.
For images projected over a network with Windows DirectX, turn off DirectX functions.
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Unlocking the Projector's Buttons
Updated: March 25, 2011
Return to Main FAQs Page