PowerLite D6155W WXGA 3LCD Projector

Selected FAQ

Q:
How long should the projection lamp last in normal operation?
A:
See the list below:

PowerLite D6150:
Normal Power Consumption mode:
Up to about 4000 hours
ECO Power Consumption mode:
Up to about 6000 hours

PowerLite D6155W/D6250:
Normal Power Consumption mode:
Up to about 3000 hours
ECO Power Consumption mode:
Up to about 4000 hours

To prolong the life of the lamp, you can do the following:
  • Turn on the projector's Sleep Mode setting.

  • Turn off the projector when not in use.


  • Make sure the projector is operated within the environmental requirement of 32 to 104 F (0 to 40 C) when operating and 14 to 140 F (10 to 60 C) when stored.


  • Lower the projector's Brightness setting.


  • Clean the air filter if dust collects on the filter (on the side of the projector) or exhaust vent (on the side of the projector).


  • When you replace the lamp, make sure you don't touch the lamp with your bare hands. The invisible residue left by the oils on your hands may shorten the lamp life. Use a cloth or a glove to handle the lamp.


  • Press the A/V Mute button on the remote control when you don't need to display the image.
Related references
Projector Setup Settings - Extended Menu
Image Quality Settings - Image Menu
Related tasks
Selecting Wireless Network Settings Manually
Published: April 12, 2011

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page