PowerLite D6155W WXGA 3LCD Projector

Selected FAQ

Q:
The image is too light or dark, or colors are incorrect. What should I do?
A:
Try the following:

  • Press the Color Mode button on the remote control to try different color modes for the image and environment.


  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation.


  • Make sure you selected the correct input source on the Signal menu.


  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.


  • For computers, check the color balance of your computer's display. (See your computer manual for details.)


  • If the colors are incorrect from a video source, make sure you selected the correct Video Signal setting.


  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.


  • If the image has been progressively darkening, you may need to replace the projector lamp soon.


  • If you changed the Color Adjustment or Abs. Color Temp setting you can try resetting them, select the Image menu, then select Reset.
Related concepts
Projector Lamp Maintenance
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Published: April 15, 2011

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page