PowerLite X9 Multimedia Projector

Selected FAQ

How can I improve the picture quality?
Make sure you've selected the best Color Mode for your picture and viewing environment. See Selecting the Color Mode. Then use the Image menu to finish adjusting the picture. See Adjusting the Image.

If this does not help, make sure the settings in the Signal menu are correct and optimized for your input source. (Signal menu settings are not available when using the projector's USB TypeB port to project your computer's display.) See Adjusting Signal Settings.

  • For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. See Technical Specifications and Compatible Video Formats for details.

  • If projecting from video equipment, connect your video equipment to the Computer (Component Video) port (for component or RGB video), if possible. If your equipment cannot connect to this port, connect it to one of the following ports (highest quality listed first): S-Video or Video (for composite video).

    To use a component video connection, you'll need a component-to-VGA cable to connect to the projector's Computer (Component Video) port. You can purchase a component-to-VGA cable from the Epson Store.
Published: March 15, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page