How do I install a printer driver from the EPSON Stylus Photo 960 CD-ROM on a Macintosh with OS X?
Follow these steps:
1. Make sure your printer is on then start your Macintosh in OS X. Put the EPSON CD-ROM in your drive.
2. Double-click the EPSON OS X Installer icon.
3. If you set up an administrator password when you installed OS X, you see the Authorization screen.
Click the lock icon, enter your administrator password, and click OK. At the next screen, click Continue.
4. Read the license agreement and click Continue, then click Agree.
5. Select the OS X drive where you want to install your printer software, then click Continue.
6. Click Install on the Easy Install screen and follow the on-screen instructions to install the printer software and restart your Macintosh.
7. Open the Applications folder then open the Utilities folder. Double-click Print Center.
8. If you see a message that you have no printers available, check to see if your printer cable is properly connected and that your printer is powered on then click Add.
9. If your printer is already listed in the Printer List, close Print Center and go to step 10. Otherwise, click Add Printer. Then select EPSON USB in the pull-down menu at the top of the window, select your printer in the Printer List, and click Add. Close Print Center.
10. Optionally, double-click the Film Factory Installer icon and follow the on-screen instructions to install the software.
11. Double-click the Printer Movies and Manual icon and follow the instructions to place a shortcut to the EPSON Printer Information Center on your desktop. (You may have to close the Film Factory window to see the icon.) Now you're ready to print!
Note: To print from Macintosh Classic applications as well as OS X applications, start your Macintosh in OS 9 and install the OS 9 printer software.