EX7210 WXGA 3LCD Projector

Selected FAQ

What should I do if only part of the picture is displayed or the image looks distorted?
Try the following solutions:

  • Press the Auto button on the remote control to optimize the image signal.

  • Try adjusting the image position using the Position menu setting.

  • Press the Aspect button on the remote control to select a different image aspect ratio.

  • If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button to return to a full display.

  • Check your computer display settings to disable dual display and set the resolution within the projector's limits. (See your computer manual for details.)

  • Check the resolution assigned to your presentation files to see if they are created for a different resolution than you are projecting in. (See your software help for details.)

  • Note:
    You cannot change the aspect ratio when displaying from a computer using the USB TypeB port or from a USB device using the USB source on the EX5210/EX7210.
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Published: September 13, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page