PowerLite S11 SVGA 3LCD Projector

Selected FAQ

Why isn't there any sound?
Try the following solutions:

  • Adjust the projector's volume settings.

  • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.

  • Press the Source Search button to switch to the correct input source, if necessary.

  • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.

  • Check the audio cable connections between the projector and your video source..

  • If you do not hear sound from an HDMI source (PowerLite X12), set the connected device to PCM output.

  • Make sure any connected audio cables are labelled No Resistance.

  • If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer.
Published: July 19, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page