VS210 SVGA 3LCD Projector

Selected FAQ

Part of my image is blurred or out of focus. What should I do?
Try the following solutions:

  • Adjust the focus.

  • Clean the projector lens.

    Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.

  • Position the projector close enough to the screen.

  • Place the projector directly in front of the center of the screen, facing it squarely, if possible.

  • Turn on automatic keystone adjustment in the projector's menu.

    Note: Excessive angles or use of keystone correction (vertical and horizontal) can affect image sharpness and quality.

  • Adjust the Sharpness setting to improve image quality.

  • If you are projecting from a computer, press the Auto button on the remote control to automatically adust the tracking and sync. If any bands or overall blurriness remains, display a uniformly patterned image on the screen and manually adjust the Tracking and Sync settings.

Related references
Focusing the Image Using the Focus Ring
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projection Distance
Cleaning the Lens
Setting Up the Projector
Published: October 5, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page