VS315W WXGA 3LCD Projector

Selected FAQ

The image is too light or dark, or colors are incorrect. What should I do?
Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. Try the following solutions:

  • Press the Color Mode button on the remote control to try different color modes for the image and environment.

  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Color Adjustment, and/or Color Saturation (available settings will vary based on input signal type).

  • Make sure you selected the correct input source on the Signal menu.

  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables or direct connection.

  • If the colors are incorrect from a video source, make sure you selected the correct Video Signal setting.

  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.

  • If the image has been progressively darkening, you may need to replace the projector lamp soon.

Related references
Projector Lamp Maintenance
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Published: October 5, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page