VS410 XGA 3LCD Projector

Selected FAQ

When and how should I clean the air filter and vents?
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

  1. Turn off the projector and unplug the power cord.

  2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush).

    Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

    Caution: Do not use canned air, or the gases may leave a residue.

  3. If dust is difficult to remove or the air filter is damaged, replace the air filter.

Related references
Cleaning the Air Filter and Vents
Published: September 30, 2011

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page