LabelWorks™ LW-400 Label Printer

Selected FAQ

How do I insert a tape cartridge?
Follow these steps:

  1. Remove any slack from the ink ribbon.

  2. Remove the rear cover, if necessary.

  3. Insert the tape cartridge and press it down firmly until it snaps into place. If there is excess tape, feed the end of the tape through the tape guide slot.

  4. Replace the cover and snap it into place.
Published: August 9, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page