PowerLite 52c Multimedia Projector

Selected FAQ

What conditions do the projector's status lights indicate?
The lights on top of the projector indicate the projector's status and let you know when a problem occurs.

Power light Warning lightStatus / Description
Green OffThe projector is operating normally
Flashing Green OffThe projector is warming up. Wait for the image to appear.
Orange Flashing OrangeThe lamp is almost burned out. This is a good time to replace it.
Orange OffThe projector is in sleep mode. You can unplug it or press the Power button to turn it on.
Flashing Orange OffThe projector is cooling down. Wait for the light to become solid before unplugging it
Flashing Orange Flashing Orange (quickly)The projector is too hot. Make sure the temperature surrounding the projector does not exceed 950F and there is plenty of space around and under the projector for ventilation. Clean the air filter, if necessary.
Flashing Red Flashing Red (quickly)The lamp is burned out. Replace it.
Flashing Red Flashing RedThere is an internal error in the projector. Turn the projector off and unplug it. Contact EPSON for help.
Red Flashing RedThere is a problem with the cooling fan, Temperature sensor, or lamp. Turn off the projector and unplug it. Contact EPSON for help.
Off Flashing RedThe projector has overheated and turned itself off. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter.

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page