PowerLite Home Cinema 5010e 1080p 3LCD Projector

Selected FAQ

What should I do if the power doesn't turn on?
Try the following solutions:
  • Make sure the power cord is connected and the power switch on the back of the projector is turned on. Then wait a moment for the  power button to light up before pressing the  power button on the projector or the On button on the remote control.

  • If you've set the Control Panel Lock, the control panel buttons are disabled; you must use the remote control to turn on the projector. To disable Control Panel Lock, press and hold the Enter button on the projector’s control panel for at least 7 seconds. See Locking the Projector.

  • If you've set the Child Lock, you have to press the  power button on the projector for 3 seconds to turn on the projector, or use the remote control. See Locking the Projector.
Published: December 2, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page