PowerLite Home Cinema 5010e 1080p 3LCD Projector

Selected FAQ

Is there a recommended sequence for turning on the projector and other equipment?
If you turn on your connected video equipment or computer before starting the projector, the projector automatically turns on and switches to the correct input source. See Using HDMI Link

Note: HDMI Link must be enabled and the video device must be connected via HDMI for this to work. The power switch on the back of the projector must also be turned on for this to work.

If you turn on the projector first, and connected devices such as an amplifier and DVD player are turned on. If multiple video devices are connected, the one last used is turned on.

When you turn off the projector, the connected devices are turned off.

Note: The CEC power link function of the connected devices must be enabled for this to work.
Published: December 2, 2011

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page