PowerLite 53c Multimedia Projector

Selected FAQ

Q:
What conditions do the projector's status lights indicate?
A:
The lights on top of the projector indicate the projector's status and let you know when a problem occurs.

Power light Warning lightStatus / Description
GreenOffThe projector is operating normally
Flashing Green OffThe projector is warming up. Wait for the image to appear.
Orange OffThe projector is in sleep mode. You can unplug it or press the Power button to turn it on.
Flashing Orange OffThe projector is cooling down. Wait for the light to become solid before unplugging it
Off Flashing Orange (quickly)The projector is too hot. Make sure the temperature surrounding the projector does not exceed 950F and there is plenty of space around and under the projector for ventilation. Clean the air filter, if necessary.
Off Flashing Red (quickly)The lamp is burned out, not installed correctly, or the lamp cover is open. Close the cover or replace or reseat the lamp if necessary.
Off Flashing RedThere is an internal error in the projector. Turn the projector off and unplug it. Contact EPSON for help.
OffRedThe projector has overheated and turned itself off. Let it cool for a few minutes, then turn it back on. Make sure there is plenty of space around and under the projector for ventilation. If it continues to overheat, you may need to change the air filter.

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page