BrightLink 485Wi Interactive WXGA 3LCD Projector with Mount

Selected FAQ

Q:
Why does my displayed image appear jittery or shaky when viewing video or moving images?
A:
If you are viewing video from a device connected to the projector's S-Video, HDMI, or Video port or from a device (other than a computer) connected to the projector's Computer1 or Computer2 port and the signal being sent is interlaced (480i/576i/1080i), be sure to turn on the Progressive setting in the Signal menu.

If you are viewing video from a device connected to the projector's S-Video, Video, or HDMI, change the Noise Reduction level in the projector's Signal menu.

Note:
Turning on the Progressive setting converts interlaced signals into progressive signals which can improve picture quality when viewing video or moving images. This setting should be turned off when viewing still images.

If you are using a splitter in your connections, try removing the splitter.

Related references
Input Signal Settings - Signal Menu
Published: April 30, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.


Viewed FAQs

Return to Main FAQs Page