BrightLink 485Wi Interactive WXGA 3LCD Projector with Mount

Selected FAQ

Q:
The pen position is not accurate. What should I do?
A:
Try the following solutions:

  • Make sure you have calibrated the system. Try manual calibration.


  • Make sure the cable cover is in place to keep cables from blocking the signal.


  • Try adjusting the pen operation area.


  • If you use the E-Zoom + button on the remote control to enlarge the image, the pen position will not be accurate. When you return to the original size, the pen position should be correct.
Related References
Adjusting the Pen Operation Area
Calibrating Automatically
Calibrating Manually
Published: May 1, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page