Epson iProjection for iOS

Selected FAQ

Q:
My iOS device is not connected to the internet after I connect it to my projector with iProjection. Why?
A:
If your iOS device is connected to the projector via a direct wireless connection (also known as an Adhoc connection), your iOS device is no longer communicating with your network (for internet access).

You'll need to connect your projector and iOS device to your wireless network to retain internet access. To set up the connection, do the following:

  1. Select Advanced as the Communication Mode on the projector.


  2. Enter the SSID (network name) into the projector using its menu system.


    • Note:
    • If your router assigns IP addresses, select IP Settings and set DHCP to On.


    • If your network is set up with security, select Security and enter the security type, PSK or encryption key of your network.


  3. Save the settings and exit the menus.


  4. Select LAN on the projector's remote.


  5. Connect your iOS device to your Wi-Fi network.


  6. Use iProjection to connect to your projector.
Published: February 10, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page