Epson WorkForce Pro WP-4023 Network Wireless Color Printer

Selected FAQ

Q:
What should I do if I'm having paper feed problems?
A:
See the solutions below for your type of paper feed problem.

Paper Feeding Problems

  • If paper does not feed for printing, remove it from the tray or cassette. Reload it against the right side, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette.


  • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.


  • Do not load more than the recommended number of sheets.


  • If paper jams when you print on both sides of the paper, try loading fewer sheets.


  • For best results, follow these guidelines:


    • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.


    • Load paper in the cassette printable side down.


    • Follow any special loading instructions that came with the paper.
Paper Ejection Problems

  • If paper does not eject fully, you may have set the wrong paper size. Cancel printing using the product control panel, then press the button to eject the paper. Remove any paper remaining in the product. Select the correct size when you reprint.


  • If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select the correct paper type setting when you reprint.
Paper Jam Problems

Published: March 27, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page