BrightLink 430i Interactive XGA 3LCD Projector with Wall Mount

Selected FAQ

Why isn't there any sound?
Try the following solutions:

  • Adjust the projector's volume settings or press the volume button on the remote control to turn up the volume.

  • Press the A/V Mute button on the remote control to resume video and audio if they were temporarily stopped.

  • Press the Source Search button to switch to the correct input source, if necessary.

  • Check your computer or video source to make sure the volume is turned up and the audio output is set for the correct source.

  • Check the audio cable connections between the projector and your video source.

  • If you do not hear sound from an HDMI source, set the connected device to PCM output.

  • Make sure any connected audio cables are labelled "No Resistance".

  • If you are using the USB Display function, turn on the Output audio from the projector setting in the EPSON USB Display Settings program on your computer.

  • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port. If not, you need to connect an audio cable.

  • If you want to use a connected audio source when the projector is off, set the Standby Mode option to Communication On and turn on the Standby Audio option.
Related references
Connecting to a Computer for Sound
Connecting to a Video Source for Sound
Published: April 7, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page