BrightLink 435Wi Interactive WXGA 3LCD Projector with Wall Mount

Selected FAQ

When and how should I clean or replace the air filter?
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

Do the following:
  1. Turn off the projector and unplug the power cord.

  2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush).

  3. Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.

    Caution: Do not use canned air, or the gases may leave residue.

  4. If dust is difficult to remove or the air filter is damaged, replace the air filter.

Related references
Cleaning the Air Filter and Vents
Replacing the Air Filter
Published: April 7, 2012

Thank you for your feedback.
Was this FAQ helpful?
Yes No  
Please tell us why this FAQ was not helpful.
Note: We are unable to reply to comments submitted here.

Viewed FAQs

Return to Main FAQs Page