PowerLite Pro Z8450WUNL WUXGA 3LCD Projector

Selected FAQ

Q:
The image is too light or dark, or colors are incorrect. What should I do?
A:
Try the following solutions:

  • Press the Color Mode button on the remote control to try different color modes for the image and environment.


  • Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, and Color Saturation.


  • Make sure you selected the correct Input Signal or Video Signal setting on the Signal menu, if available for your image source.


  • Make sure all the cables are securely connected to the projector and your video device. If you connected long cables, try connecting shorter cables.


  • If you are using the ECO Power Consumption setting, try selecting Normal in the Settings menu.


  • If the image has been progressively darkening, you may need to replace the projector lamp soon.
Related references
Signal Menu
Image Menu
Settings Menu
Extended Menu
Replacing the Lamps
Published: June 1, 2012

Was this helpful? Yes No Didn't Apply

Viewed FAQs

Return to Main FAQs Page